Call us: 08045477298
Automatic Voltage Regulator offered by us has been designed by qualified technocrats of our organization. Application of this equipment can be noticed in power transmission unit of commercial and residential buildings to control voltage supply in electrical circuit. State of the art technical knowledge has been applied to design such regulator. Quality of this Automatic Voltage Regulator has been determined on the basis of thorough testing procedure before its dispatch to customer. This product can be accessed in different specifications and at competitive price range.
Features
Further Details:
Inner View of Regulator
WHO NEEDS A STABILIZER:
The industrial units having abnormally higher failure rate of Electrical Equipments such as bulbs, tubes, chokes, starter, contactor coils & motors (particularly smaller capacity motors upto 7.5 H.P.) Etc. Should verify that it may be due to HIGHER voltage. You may note down Hourly readings of voltage variation for few days. If you find that input voltage is above 230 volts single phase/400 volts Three phase even for few hours a day, then you definitely require a stabilizer.
HOW TO ACCESS HIGHER LOSSES & LOW POWER FACTOR IN INDUSTRIAL UNITS WITHOUT INSTALLING STABILIZER:
Note down hourly readings of current and voltage of one motor operating at constant load for 2-3 days. From the different readings you will observe that the current drawn by the motor is minimum at 390/400 volts as compared to the current drawn at other voltages. This means that power consumed by the motor is minimum at 390/400 volts.
Also note down hourly readings of voltage and K.W. from your Electronic Energy Meter for 2-3 days. From the readings you will observe that K.W. is minimum at 390/400 volts in most of the readings as compared to the higher voltage.
If you find that the above collected details are true then you will certainly have the advantages after installing the Servo stabilizer as mentioned on succeeding page 3
ADVANTAGES:
The table below gives approximate quantitative advantages of Automatic Voltage Controller at various fluctuation levels:
Input Voltage Variation | Appx.% reduction In Breakdown of Appx. Power Saving Possible Electrical equipments | |||
| Motor Load Below 10 hp | Lighting Load | Motor Load Below 10 hp | Lighting Load |
380-400 Volts | Nil | Nil | Nil | Nil & servo stabilizer is not required |
400 - 420 volts | 5% | 10% | 3% | 5% |
420 - 440 volts | 10% | 20% | 5% | 10% |
440 - 460 volts | 40% | 40% | 7% | 20% |
460 - 480 volts | 60% | 60% | 10% | 30% |